Celomix Simple
Even colour with fine fibres · Horizon family
For architects, contractors and project managers
Technical data and application
Mixed with water, Celomix cellulose coating becomes an even paste that is spread on the wall with a flexible trowel: seamless, breathable, sound-absorbing and repairable in place.
Data sheet
Product data
| Property | Value | Note |
|---|---|---|
| Composition | Cellulose fibre, silk, mica flakes, pigment and base binder | Depending on the product line |
| Packs | Bags of 1, 3, 5 and 10 kg | Dry powder, ready to mix with water |
| Coverage | About 3 m² per kilogram | About 2.5 m² on rough surfaces |
| Particle size | 2 to 4 mm | |
| Layer thickness | About 2 to 3 mm | Laboratory test sample: 2.1 to 3.3 mm |
| Drying time | 8 to 24 hours | Depending on temperature, humidity and ventilation |
| Elasticity | 3 to 4 mm per m² | Factory data |
| Antistatic | Prevents up to 97.9% of dust settling | Factory data |
| Application tool | Clear plastic (Flexiglass) trowel | A single tool, no special equipment |
| Substrate | Plaster, cement, concrete, plasterboard | Dry, clean, with a suitable primer |
| Repair | Local, with the same colour batch | No need to redo the whole wall |
Packaging
Easy, affordable, stylish
Celomix comes as a dry powder in bags of 1, 3, 5 and 10 kg. The colour code, production date and batch number are printed on every bag.
- Acoustic
- Thermal
- Fire-retardant
- Non-toxic
Which pack for your job?
- 1 kgAbout 3 m²Local repairs, details and small decorative motifs
- 3 kgAbout 9 m²One feature wall, such as behind a bed or a TV wall
- 5 kgAbout 15 m²The walls of a small room or a hallway
- 10 kgAbout 30 m²Large rooms, halls and projects
Coverage is based on about 3 m² per kilogram on a smooth surface, and about 2.5 m² on rough surfaces. For each wall or project, order the whole quantity at once and from one batch so the colour stays exactly the same. Work out the exact quantity
You will need
- A pack of Celomix
- A plastic bucket
- A plastic trowel
- Warm water
Laboratory testing
Independent test results
| Test | Result | Standard |
|---|---|---|
| Thermal insulation | Thermal conductivity 0.045 to 0.056 W/m·K; an insulator | ASTM D5470 |
| Sound absorption | Absorbs above 1000 Hz; absorption coefficient up to about 0.4 at 5 to 6 kHz | ISO 10534-2 |
| Fire behaviour | With flame-retardant treatment the flame goes out as soon as the source is removed, and the burnt length is at most 2 cm; rated “very good” | ISO 6941 |
| Non-toxicity | Biocompatibility GI = 83.4%; non-toxic | ISO 11269 |
| Light fastness | Grade 5 of 8 after 120 hours of exposure | ISO 105-J05 |
| Abrasion resistance | More than 500 cycles with no noticeable change in appearance | ISO 12947 |
| Air permeability (breathability) | 96.9 L/m²·s | ISO 9237 |
| Area weight of the layer | 440 to 520 g/m² | INSO 1243 |
Niknam Takhasos Parsian laboratory (Parsianik), Isfahan; test report of June 2026. Results apply to the samples submitted to the laboratory.
Five product lines
A different texture, the same application
Mica & Thread
Mica flakes and coloured threads · Horizon family
Semi-Silk
The soft sheen of silk · Bloom family
Micatex
Stone-effect texture and larger flakes · Gem family
Silk
Our most luxurious texture · Silken family
Application
Five steps to a finished wall
Preparing the surface
The surface must be dry, clean and free of dust; metal parts are covered with anti-rust paint and the surface is evened out with a primer of matching colour.
Mixing
Put the contents of the pack into a plastic bucket and add the amount of warm water shown on the bag; use 50 to 75% of it for the first mix and knead thoroughly.
Resting
Leave the mixture for 20 to 25 minutes, then mix again before applying.
Trowelling
The paste is spread and smoothed on the wall with a plastic trowel to an even thickness; each wall should be done in one go, without a break.
Drying
Depending on the weather and ventilation it dries in 8 to 24 hours, after which the surface is ready for use.
The exact amount of water for each pack size is printed on the bag.
For project managers, consultants and clients
Time, cost and quality, all under control
Applying with a single flexible trowel standardises the coating process and clears the usual bottlenecks in handing over the finishing phase.
Controlled consumption
Keeping to the standard nominal thickness holds the consumption per square metre to the approved budget.
Less waste
Leftover paste can be dried and soaked again, with almost nothing lost.
Schedule control
A trained applicator covers more area per shift, shortening the critical path of the finishing phase.
Handover without rework
Local repair instead of re-application, so the handover to the client is not delayed.